Transducer - Thru Hull

Airmar B175Mw/12° Tilt1kWFlush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a...

Simrad Bronze HDI XDCR 20deg Tilt 50/200 455/800 Model: 000-13907-001 Provides 50/200kHz traditional frequencies PLUS 455/800kHz Down Scan Imaging plus temperature The transducer comes with a 33 ft cable and Black 9 Pin connector which plugs...

Airmar B285C-M Thru-Hull Medium CHIRP Model: B285C-M-MM Depth and Temperature 85-135 kHz Frequency Bronze housing 1 kW 16° - 11° Beamwidth Exclusive Xducer ID® technology As Chirp continues to redefine recreational fishing,...

Tilted Element™ Thru-HullMinimize Your DragThe P19 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm (2/10") of...

Airmar SS264 50kHz Wide Beam, 1kW, 20° Tilt, Furuno 10-Pin, Depth and temp Model: SS264-20-W5-10F Depth and fast-response water-temperature sensing SS264N operating at 50 kHz frequency delivers a wide 25° beam 1 kW of power Outstanding...

Raymarine RVM-420 Transducer Pair 20 deg Offset Model: T70544 20° Offset Stainless Steel Through Hull Mount RealVision MAX 8-Meter Extension Cable 2 Meter y-Cable RVM-400 series stainless steel all-in-one through hull transducer brings...

Raymarine RV-220 Bronze Through Hull Transducer Pack (with 20° deadrise compensation) Model: T70319 Designed for inboard or outboard boats, the RV-220 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the...

B60 housing 600 Watts Depth & Temperature Dual Frequency (50/200 kHz) 20 Degree Tilt - Fits vessels with hull deadrise of 16 to 24 degrees. Compatible hull material: fiberglass and wood

Raymarine CPT-S Bronze thru Hull transducer 0° Angled ElementModel: A80446NEW CPT-S bronze through hull 0° angled element CHIRP sonar transducerSpecificationsInstallation typeThrough HullMaterialBronzePower RMS-Max Depth900ftFrequencyCHIRP...

600 Watts 50/200 kHz 40/10 degree Beam Angles Bronze Thru-Hull with 7' Stem, Speed and Temperature 30 Foot Cable with 10-Pin Connector  

Freq. Khz Power Beam Width (°) LF//HF (-3dB) Max Depth (ft) Septh,Speed,Temp # of Pins Supported Deadrise / Transom Angles 77/200 500W 45/15 900 Depth,Temp 8 8-15° Deadrise

TM275LHW Transom Mount CHIRP Transducer with Temp - 12-Pin Connector for TZT3The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the transom mounted TM275LH-W provides a high frequency range of 150-250Khz and a...