Switches & Accessories

Panel Seal/Waterproof "A" Frame Magnetic Circuit Breakers Branch AC or DC circuit breaker for Paneltronics electrical distribution panels Meets all American Boat and Yacht Council (ABYC) Standards for non ignition protected circuit breakers UL...

Blue Sea Systems m-Series Mini Dual Circuit Battery Switch - Red Model: 6010-BSS Tin-plated copper studs for maximum conductivity and corrosion resistance Studs accept 3/8"" (M10) ring terminals 7/8"" (22mm) stud length accepts multiple cable...

4131 Lockout Slide 2 Position 3 Pole C-Series Features: Allows only 1 of a pair of double pole or triple pole AC circuit breakers to be activated at a time Guarantees that AC power from 2 sources (power company and genset or inverter) will not be...

Blue Sea Systems e-Series On Off Battery Switch Model: 9003E-BSS 350 Amps continuous rating for inboard gasoline or diesel engines. Tin-plated copper studs for maximum conductivity and corrosion resistance Accepts up to 4/0 AWG battery...

BEP 700 Easy Fit Battery Model: 700 Can easily be retro-fitted in place of most European post and lever type switches Molded in high temperature, fiber reinforced plastics Tin-plated copper studs and nuts Ignition-protected The Easyfit Battery...

SPDT Contura Switch - 2-LEDs - (ON)/OFF/(ON) Single pole, double throw switch turns one of two circuits on. Common applications include intermittent trim tab or windshield wiper control. Contura switches are rated to IP66, high-pressure wash resistant...

Connection Cable Bare End - 300 mm This 300 mm (12") cable simply pushes onto the back of the push button switches and features 0.8 mm² / 18g cables for switch and backlight connections that comply with ISO/ABYC. Other end is stripped wire for easy...

Paneltronics LED Indicator Light - 5/32" - 24 VDC - Red Ideal for use as Status or Alarm Indicators Large T-1 size LED's Nylon housing is classified UL 94 V-0 Press to fit into 0.166" diameter panel hole Pigtails are tin plated, 22 gauge,...

Silicone Rubber BootBlack23/32" Round Nut For bat handle toggle switches, push button switches, and panel seal circuit breakers Provides a watertight seal between switch actuator, bushing, and panel face Mounting nuts are bonded to eliminate...

Contura III Switch SPDT - (ON)-OFF-ON Vibrations, shock, thermoshock, moisture and salt spray resistant Mounts in Blue Sea Systems Contura Water Resistant Panels and Contura Switch Mounting Panels WARNING: This product can expose you to chemicals...

2-Position SPST Push-Pull Switch - OFF/ON Single pole, single throw switch turns one circuit on and off. Features: Heavy-duty, noncorrosive construction with moisture-repellent insulators Brass case, stem, terminals and mounting hardware All knobs...

DPDT Rocker Switch - 12V/24V - (ON)/OFF/(ON) Double pole, double throw switch turns two of four circuits on at a time. Features: Nominal voltage is 12V DC Rated for 25A at 12V DC Six 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x...