Radar/TV Mounts

18" Modular Mount AFT Raked 10 x 10 Base Plate for Large Sat Domes - 18" Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus...

23.75" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate RequiredInstall your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your...

1.5" Thermal Camera Top Down Riser Mounts Vertical or Upside Down for FLIR MD-Series & Raymarine T-200Ever wanted to hand your FLIR M-Series or Raymarine T-Series upside down? Well now you can with the Seaview Top Down Riser. Made from Kingstarboard a...

Attwood LED 12V Combination Anchor/Streaming LightEdson offers the 67510 Attwood LED Anchor/Steaming Light (72" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. With 3NM of 360° visibility while drawing a fraction of the...

PM5-FMT-8Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making...

PM-W6-7This 6° wedge goes between your Seaview mount and mounting surface. The base of the wedge is 7"x7" and is made from machined King Starboard . Utilize wedges to compensate for deck angle or planning attitude of the boat.FeaturesPre-drilled mounting...

Complete Spreader Kit for Radar or Satdome ApplicationsThis three piece kit consists of a mid section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that for what ever you...

Universal Box Top for All-Around, Masthead and Stern LightsThis Light Bar Top is a universal box top for all-round, masthead & stern lights. Please note that lights are not included. Manufacturer : Seaview Manufacturer Part No : LTB-BOX UPC :...

LTB Top Standard 1"-14 Thread for GPS or Wind TransducerAdapter to mount a GPS unit or wind transducer. Uses standard 1"-14 threads. Manufacturer : Seaview Manufacturer Part No : LTB-U UPC : 839662009522

22.5" Dual Mount for Up To 4.5' Open Array Radar - Top for Sat Domes - Top Plate Required Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics...

12" Modular Mount AFT Raked 10" x 10" Base Plate for Large Sat Domes - 18" Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus...

18" Modular Mount Vertical 8" Round Base Plate - Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective...