Installation Accesories

Weld Mount AT-5 White Nylon Wire Tie Mount 50 PackModel: 805950The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150...

Weld Mount AT-3 Black Nylon Wire Tie Mount 30 PackModel: 803BThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20"". Average pull...

Weld Mount AT-3 White Nylon Wire Tie Mount 50 PackModel: 803950The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20"". Average pull...

Weld Mount AT-3 White Nylon Wire Tie Mount 30 PackModel: 803The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20"". Average pull strength...

Weld Mount Stainless Studs (1/4 - 20 Thread) 1"" tall (1/4 - 20 Thread)Model: 142016Our stainless steel stud mounts to virtually any surface using our acrylic adhesive. This Is a structural part with 500 lbs of tensile strength and 650 lbs in shear. All...

TH Marine HYDRA Battery Cable ExtenderModel: HCE-K-DPComes with stainless steel hardware, 5/16-18 studPrevents the need for butt splicesActs as a simple solution to most electrical rigging issuesThe days of struggling with marine battery connections are...

Molded nylon encases 6 or 12 pairs of connectors that use screw compression to secure wires without use of lugs. ideal for electronic installations. Brass barrels capture wires and are held in place with a stainless steel ?finger"" compressed by a screw...

Molded nylon encases 6 or 12 pairs of connectors that use screw compression to secure wires without use of lugs. ideal for electronic installations. Brass barrels capture wires and are held in place with a stainless steel ?finger"" compressed by a screw...

Blue Sea Terminal Block Jumper for 30A Terminal BlocksModel: 9217-BSSJumpers allow creation of common circuits on independent connectorsFits 30 Ampere terminal blocks (2500 Series)What's in the Box:30A Jumper x 5

Blue Sea Push Button Switch Label KitModel: 4230-BSS50 ICON Labels used on Backlit Push Button SwitchesScratch resistant polycarbonate materialBack printed for durabilityWaterproof adhesive for longevity in wet environments

Blue Sea 10A Push Button LED Ring Switch Off-(On) Red - Momentary OnModel: 4163-BSS10A continuousCan be wired for normally open or normally closedInstalls with .110inch quick connects (included in retail package)SpecificationsActionOFF-(ON)- Momentary...

Blue Sea 10A Push Button LED Ring Switch Off-On RedModel: 4162-BSS10A continuousCan be wired for normally open or normally closedInstalls with .110inch quick connects (included in retail package)SpecificationsActionOFF-ONAmperage10A @ 12V DC Resistive ...