Installation Accesories

Weld Mount AT-3 Black Nylon Wire Tie Mount 50 PackModel: 803950BThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20"". Average pull...

Blue Sea 2126 MaxiBus 250A BusBar - Four 5/16""-18 StudsModel: 2127-BSSInsert molded stainless steel studs eliminate need for securing nut and allow high torquing for excellent electrical contactRaised bus provides easy access to multiple wires on a...

Blue Sea Systems Dual PowerPost - Two 3/8""-16 StudsModel: 2017-BSSDesigned for connecting high amp conductorsIncludes one black and one red insulatorProvides a termination point for extending the length of outboard harnesses or other...

Blue Sea Systems PowerPost - 5/16"" - 18 StudModel: 2002-BSSConnects high amperage cables securelyStud dimensions: 5/16"" x 7/8""Base Material is PBT UL94 V0Insulated single stainless steel stud terminates multiple large...

Weld Mount Stainless Studs (#8-32 thread) 1.25"" tall 15 PackModel: 83220These small panel studs have a wide range of uses. Originally they were used for mounting on The backside of dash panels or for mounting to the console. Now they are used for...

Weld Mount Stainless Studs (#8-32 thread) .75"" tall 15 PackModel: 83212These small panel studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels or for mounting to the console. Now they are used for...

Weld Mount AT-850 Mixing Tip for AT-2010 and AT-8040 10 PackModel: 80850The At-850 tip is for use with AT-2010 and AT-8040. It’s unique design eliminates any possibility of the cartridge plugging up as the entry is separated.What's in the Box:10 AT-850...

Weld Mount AT-650 3.5"" Adhesive Mixing Tip for AT-6030 and AT-4020 10 PackModel: 80650The 3.25" AT-650 mixing tip is for use with AT-6030 and AT-4020. The 3.25 inch significantly reduces waste over the traditional 6 inch tip. Each package contains 10...

Weld Mount AT-5 Black Nylon Wire Tie Mount 30 PackModel: 805BThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs...

Well Mount AT-5 Black Nylon Wire Tie Mount 50 PackModel: 805950BThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150...

Weld Mount AT-3 Black Nylon Wire Tie Mount 30 PackModel: 803BThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20"". Average pull...

Weld Mount AT-3 White Nylon Wire Tie Mount 50 PackModel: 803950The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20"". Average pull...