GPS - Accessories

Garmin Field Installable Adapter Kit for the Garmin BlueNet™ Network Model: 010-12528-20 Use these field installable connectors to wire a Garmin BlueNet™ network cable that does not have a factory installed connector.

This 4 meter cable has a female micro C NMEA2000® connector on one side and a simnet connector on the other.

Simrad 4-pin Powercord Model: 000-00128-001 UPC: 042194901145 Power Cable:(4 Pin conn. to 4 bare wires for Power in, Power control bus and external alarm) 2 m (6.5 ft)

Garmin BlueNet™ Network Cable (20 ft)Model: 010-12528-31This short Garmin BlueNet™ network cable is used to connect a Garmin BlueNet™ 20 switch or Garmin BlueNet™ 30 gateway to each other, or other Garmin BlueNet network products.

Garmin BlueNet™ 30 GatewayModel: 010-02613-00The Garmin BlueNet 30 gateway is required for Garmin BlueNet™ network compatible devices to network with legacy Garmin marine devices. Through this gateway you can connect a Garmin BlueNet network to a legacy...

Garmin BlueNet 20 SwitchModel: 010-02612-00Increase the number of available network ports in a Garmin BlueNet™ network. Once you’ve used all the ports on your compatible chartplotter just add a Garmin BlueNet 20 switch to the setup and keep constructing...

Garmin Powered Mount For GPSMAP86 Series Model: 010-12946-00 Designed for one-handed, quick-release operation, this powered mount allows for easy grab-and-go accessibility with your compatible GPSMAP® 86 handheld. It uses the AMPS mounting pattern...

Use with PB200 to connect to Furuno Navnet and RD30 7-pin NMEA0183 port.

RAM Zinc Coated U-Bolt Base with 1" BallThe RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. The base...