Accessories

The new Raynet (F) to SeaTalkhs (M) cable allows to directly connect your G-Series, E-Wide, C-Wide and E-Classic MFDs to new generation RayNet radar, sonar or other accessory that utilises the new RayNet connection. The adapter cable is 10 feet (3m) long...

This has a RayNet Female connector at one end and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a ""RJ45"" Digital Radar Cable to a ""RayNet"" Radar...

The new RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect 2 standard RayNet networking cables together in instances where you need to extend the length of a cable run. The cable is 3.9-inches (100mm) long.

The new 400mm RayNet (F) to RayNet (F) network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary. This...

The new Raynet (F) to SeaTalkhs (F) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide, C-Wide and E-Classic MFDs to new generation RayNet multifunction displays. The adapter cable is 15-inches...

The Raynet to RJ45 Ethernet (M) adapter can be used to connect new c and e-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch. When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a...

20m RayNet to RayNet Port Connectivity

5m RayNet to RayNet Port Connectivity

10m RayNet to RayNet Port Connectivity

2m RayNet to RayNet Port Connectivity

The Raynet to RJ45 Ethernet (M) adapter can be used to connect new c and e-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch. When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a...