Description
RAM Motorcycle Fork Stem Base with 1" Ball
The RAM fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5 degrees to 1.10 degrees at the following intervals:
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag. RAM recommends that you review the installation instructions for this part prior to ordering.
Manufacturer : RAM Mounting Systems
Manufacturer Part No : RAM-B-342U
UPC : 793442906213
The RAM fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5 degrees to 1.10 degrees at the following intervals:
| Metric | Standard |
| 12mm | .5 degrees |
| 14mm | .55 degrees |
| 16mm | .63 degrees |
| 18mm | .71 degrees |
| 20mm | .79 degrees |
| 28mm | 1.10 degrees |
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag. RAM recommends that you review the installation instructions for this part prior to ordering.
Manufacturer : RAM Mounting Systems
Manufacturer Part No : RAM-B-342U
UPC : 793442906213
